via University of Minnesota
Technology opens door to ubiquitous, more easily fabricated electronic screens
In a groundbreaking new study, researchers at the University of Minnesota Twin Cities used a customized printer to fully 3D print a flexible organic light-emitting diode (OLED) display. The discovery could result in low-cost OLED displays in the future that could be widely produced using 3D printers by anyone at home, instead of by technicians in expensive microfabrication facilities.
The research is published in Science Advances, a peer-reviewed scientific journal published by the American Association for the Advancement of Science (AAAS).
The OLED display technology is based on the conversion of electricity into light using an organic material layer. OLEDs function as high quality digital displays, which can be made flexible and used in both large-scale devices such as television screens and monitors as well as handheld electronics such as smartphones. OLED displays have gained popularity because they are lightweight, power-efficient, thin and flexible, and offer a wide viewing angle and high contrast ratio.
“OLED displays are usually produced in big, expensive, ultra-clean fabrication facilities,” said Michael McAlpine, a University of Minnesota Kuhrmeyer Family Chair Professor in the Department of Mechanical Engineering and the senior author of the study. “We wanted to see if we could basically condense all of that down and print an OLED display on our table-top 3D printer, which was custom built and costs about the same as a Tesla Model S.”
The group had previously tried 3D printing OLED displays, but they struggled with the uniformity of the light-emitting layers. Other groups partially printed displays but also relied on spin-coating or thermal evaporation to deposit certain components and create functional devices.
In this new study, the University of Minnesota research team combined two different modes of printing to print the six device layers that resulted in a fully 3D-printed, flexible organic light-emitting diode display. The electrodes, interconnects, insulation, and encapsulation were all extrusion printed, while the active layers were spray printed using the same 3D printer at room temperature. The display prototype was about 1.5 inches on each side and had 64 pixels. Every pixel worked and displayed light.
“I thought I would get something, but maybe not a fully working display,” said Ruitao Su, the first author of the study and a 2020 University of Minnesota mechanical engineering Ph.D. graduate who is now a postdoctoral researcher at MIT. “But then it turns out all the pixels were working, and I can display the text I designed. My first reaction was ‘It is real!’ I was not able to sleep, the whole night.”
Su said the 3D-printed display was also flexible and could be packaged in an encapsulating material, which could make it useful for a wide variety of applications.
“The device exhibited a relatively stable emission over the 2,000 bending cycles, suggesting that fully 3D printed OLEDs can potentially be used for important applications in soft electronics and wearable devices,” Su said.
The researchers said the next steps are to 3D print OLED displays that are higher resolution with improved brightness.
“The nice part about our research is that the manufacturing is all built in, so we’re not talking 20 years out with some ‘pie in the sky’ vision,” McAlpine said. “This is something that we actually manufactured in the lab, and it is not hard to imagine that you could translate this to printing all kinds of displays ourselves at home or on the go within just a few years, on a small portable printer.”
Original Article: Researchers develop first fully 3D-printed, flexible OLED display
More from: University of Minnesota
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
3D-printed flexible OLED display
- Apple pushes suppliers with new iPad Pro OLED process as iPhone 16 picks up new display driver provider
Anyone following Apple supply chain reports knows that the company has been working toward adopting OLED displays on the iPad Pro for quite ... This hybrid OLED combines the advantages of flexible ...
- Apple's brand new OLED iPad Pro to feature display tech even the iPhone can't match — fresh details revealed just days ahead of May 7 event
A new report days ahead of Apple’s May 7 ‘Let Loose’ iPad event has revealed that Apple’s new OLED iPad Pro M3 (or should we say M4?) will feature new OLED display technology ... combine the ...
- OLED Universal Display Corporation
Universal Display ... OLED device and manufacturing technologies, including FOLED that are flexible OLEDs for the fabrication of OLEDs on flexible substrates; and OVJP, an organic vapor jet ...
- Universal Display Corporation (OLED)
Besides Wall Street's top -and-bottom-line estimates for Universal Display (OLED), review projections for some of its key metrics to gain a deeper understanding of how the company might have fared ...
- Samsung S95D OLED Review
The Samsung S95D OLED 77-inch we tested is $4,599.99. You can buy it at Samsung and other retailers. The S95D OLED display mixes deep ... TV operating system is flexible, but it is a little ...
Go deeper with Google Headlines on:
3D-printed flexible OLED display
[google_news title=”” keyword=”3D-printed flexible OLED display” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
3D printed OLEDs
- Study unveils 3D printing PQD-polymer architectures at room temperature
A technology enabling the fabrication of intricate three-dimensional (3D) quantum dot (QD)-based structures at room temperature has been developed.
- A 3D Printer On Every Desk? Why Companies Are Buying More 3D Printers
Entry-level desktop 3D printers saw record sales in 2023. It’s not the number of machines sold that’s surprising; it’s who’s buying them: businesses.
- Combatting Homelessness and Climate Change Through 3D-Printed Homes
The building and construction sector is the biggest culprit in the climate crisis. The construction industry uses over 3 billion tons of raw materials, ...
- Marriage of synthetic biology and 3D printing produces programmable living materials
Scientists are harnessing cells to make new types of materials that can grow, repair themselves and even respond to their environment. These solid "engineered living materials" are made by embedding ...
- 3 3D Printing Stocks With the Potential to Make You an Overnight Millionaire
Not too long ago, analysts and early adopters touted the technology of 3D printing as the future of manufacturing. Then came market corrections and concerns surrounding the feasibility of long-term ...
Go deeper with Google Headlines on:
3D printed OLEDs
[google_news title=”” keyword=”3D printed OLEDs” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]