Trapping light with an optical version of a whispering gallery, researchers at the National Institute of Standards and Technology (NIST) have developed a nanoscale coating for solar cells that enables them to absorb about 20 percent more sunlight than uncoated devices. The coating, applied with a technique that could be incorporated into manufacturing, opens a new path for developing low-cost, high-efficiency solar cells with abundant, renewable and environmentally friendly materials.
The coating consists of thousands of tiny glass beads, only about one-hundredth the width of a human hair. When sunlight hits the coating, the light waves are steered around the nanoscale bead, similar to the way sound waves travel around a curved wall such as the dome in St. Paul’s Cathedral in London. At such curved structures, known as acoustic whispering galleries, a person standing near one part of the wall easily hears a faint sound originating at any other part of the wall.
Whispering galleries for light were developed about a decade ago, but researchers have only recently explored their use in solar-cell coatings. In the experimental set up devised by a team including Dongheon Ha of NIST and the University of Maryland’s NanoCenter, the light captured by the nanoresonator coating eventually leaks out and is absorbed by an underlying solar cell made of gallium arsenide.
Using a laser as a light source to excite individual nanoresonators in the coating, the team found that the coated solar cells absorbed, on average, 20 percent more visible light than bare cells. The measurements also revealed that the coated cells produced about 20 percent more current.
The study is the first to demonstrate the efficiency of the coatings using precision nanoscale measurements, said Ha. “Although calculations had suggested the coatings would enhance the solar cells, we could not prove this was the case until we had developed the nanoscale measurement technologies that were needed,” he noted.
This work was described (link is external) in a recent issue of Nanotechnology by Ha, collaborator Yohan Yoon of NIST and Maryland’s NanoCenter, and NIST physicist Nikolai Zhitenev.
The team also devised a rapid, less-costly method of applying the nanoresonator coating. Researchers had previously coated semiconductor material by dipping it in a tub of the nanoresonator solution. The dipping method takes time and coats both sides of the semiconductor even though only one side requires the treatment.
In the team’s method, droplets of the nanoresonator solution are placed on just one side of the solar cell. A wire-wound metal rod is then pulled across the cell, spreading out the solution and forming a coating made of closely packed nanoresonators. This is the first time that researchers have applied the rod method, used for more than a century to coat material in a factory setting, to a gallium arsenide solar cell.
“This is an inexpensive process and is compatible with mass production,” said Ha.
Learn more: Psst! A Whispering Gallery for Light Boosts Solar Cells
The Latest on: Solar cell efficiency
[google_news title=”” keyword=”solar cell efficiency” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Solar cell efficiency
- Light, flexible, efficient: Perovskite-based tandem solar cellson May 2, 2024 at 2:15 am
Dübendorf, St. Gallen und Thun, 02.05.2024 - All-perovskite tandem solar cells could soon pick up where silicon solar cells reach their limits. These highly efficient, lightweight and flexible cells ...
- New metallization tech for HJT solar cells minimizes silver use, increases efficiencyon May 2, 2024 at 1:58 am
German research institute Fraunhofer ISE has unveiled a new metallization process for heterojunction solar cells that reportedly increases power conversion efficiencies by over 0.1% while reducing ...
- Perovskite-based tandem solar cellson May 1, 2024 at 5:00 pm
But silicon is not the only way to make a solar cell – and possibly not even the best. Silicon-based photovoltaic cells have been perfected so far that they are reaching the limits of their efficiency ...
- Scientists make breakthrough while investigating potential of solar panels: 'We figured some other ways to capture more solar energy'on May 1, 2024 at 4:15 am
Scientists have been hard at work figuring out ways to make solar cells — the part of the solar panel that actually absorbs light — work more efficiently. However, a group of scientists working on ...
- Is perovskite PV still the future of solar?on May 1, 2024 at 3:01 am
So, is perovskite PV still the future of solar? It seems likely to have place among the solutions, at the very least. Applications will get more energy efficient. The need to efficient solar is ...
- Tin halide perovskite solar cell based on new precursor additive achieves 12.22% efficiencyon April 30, 2024 at 5:00 pm
“The additive significantly boosts the open-circuit voltage to 0.94V and realizes a record highest efficiency for the champion device, low open-circuit voltage loss, and negligible hysteresis in the ...
- A strategy to boost the efficiency of perovskite/organic photovoltaic cellson April 29, 2024 at 5:32 am
While perovskite/organic tandem solar cells could theoretically achieve high PCEs and stabilities, their performance is hindered by a process known as phase segregation. This process degrades the ...
- A strategy to boost the efficiency of perovskite/organic solar cellson April 28, 2024 at 6:00 am
So far, organic solar cells have achieved a maximum certified power conversion efficiency (PCE) of 19.4%, which is lower than that exhibited by silicon solar cells. A proposed strategy to boost their ...
- Key to efficient and stable organic solar cellson April 24, 2024 at 5:00 pm
Their research, titled "The role of interfacial donor-acceptor percolation in efficient and stable all-polymer solar cells," paves the way for more sustainable and viable solar energy solutions for ...
via Bing News