Left: Scanning electron microscopy image of the CuNW network on a copper-sprayed surface. Right: Up-close image of CuNW nanowire, which is about 60 nm in diameter, approximately 100x smaller than a human hair.
An ancient metal used for its microbial properties is the basis for a materials-based solution to disinfection.
A team of scientists from Ames National Laboratory, Iowa State University, and University at Buffalo developed an antimicrobial spray that deposits a layer of copper nanowires onto high-touch surfaces in public spaces. The spray contains copper nanowires (CuNWs) or copper-zinc nanowires (CuZnNWs) and can form an antimicrobial coating on a variety of surfaces. This research was initiated by the COVID-19 pandemic, but the findings have wider-reaching applications.
People have taken advantage of copper’s antimicrobial properties since 2400 B.C. to treat and prevent infections and diseases. It has been proven effective for inactivating viruses, bacteria, fungi, and yeasts when they are directly in contact with the metal. According to Jun Cui, a scientist at Ames Lab and one of the lead researchers on the project, “copper ion can penetrate the membrane of a virus and then insert itself into the RNA chain, and completely disable the virus from duplicating itself.”
Amidst the pandemic, “The DOE asked researchers, what can you do to help to mitigate this COVID situation?” Cui said. Ames Lab is known for work in materials science, not a field that often intersects with disease research. However, Cui’s team came up with the idea to apply copper’s antimicrobial properties to help reduce the spread of COVID.
Cui explained their idea came from a separate project they were working on, which is a copper ink designed for printing copper nanowires used in flexible electronic devices. “So the thinking is, this is ink, and I can dilute it with water or even ethanol, and then just spray it. Whatever the surface, I spray it once and coat it with a very light layer of a copper nanowire,” he said.
First the surface needs to be cleaned and disinfected, then the reformulated copper ink solution can be applied. The ideal coating should be thin enough to be transparent. The ink can be diluted with water or alcohol to make it sprayable, and it works on plastic, glass, and stainless-steel surfaces.
The team tested two types of copper ink, CuNW and CuZnNW. Compared to a plain copper disk, both inks were just as effective at disabling the virus. However, it took 40 minutes for the copper disk to disable the virus, whereas it took the copper inks only 20 minutes. The nanowires worked faster because of their greater surface area.
In a comparison between the two ink coatings, the CuNW inactivated the virus more quickly than CuZnNW during the first 10 minutes. However, CuZnNW had a more steady and sustainable release of copper ions, compared to CuNW, which makes the coating effective for a longer amount of time. Ultimately the team concluded that the CuZnNW was the best option for a sprayable copper nanowire coating for antimicrobial purposes.
Cui said that this work was important, not just because of the pandemic, but since these nanowires can protect against many different microbes, “there’s the chance that we can have a lasting impact to human society.”
Original Article: Scientists use copper nanowires to combat the spread of diseases
The Latest on: Antimicrobial coating
- Antimicrobial Powder Coatings Market to show impressive growth of 10.67% CAGR during the period 2022-2027 | 102 Report Pageson September 26, 2022 at 11:03 pm
Report Pages] Antimicrobial Powder Coatings market size was valued at USD 1547.68 million in 2021 and is expected ...
- Medical Antimicrobial Surface Coatings Market 2022 Company Challenges, Latest Advancements, Growth Prediction, and Forecast by 2028on September 26, 2022 at 9:20 pm
Number of Tables and Figures :151 | The global "Medical Antimicrobial Surface Coatings Market"size is projected to ...
- Medical Coatings Market to Reach USD 8.20 Billion by 2029 | Exhibit CAGR of 9.8% (2022-2029)on September 25, 2022 at 11:58 pm
Harland Medical Systems, Inc. (U.S.), SURMODICS (U.S.), DSM (Netherlands), AST Products, Inc. (U.S.), Biocoat Incorporated (U.S.), Precision Coating Company, Inc. (U.S.), Medicoat AG (Switzerland), ...
- Using Antimicrobial Materials for Everyday Productson September 21, 2022 at 5:00 pm
BioInteractions has a long history of making coatings that enhance implantable medical devices by preventing clotting, infection, and rejection. The company brings this expertise built over 30 years ...
- Global antimicrobial coatings market size to record 10.2% CAGR through 2028on September 20, 2022 at 10:37 am
Pune, India, Sept. 19, 2022 (GLOBE NEWSWIRE) -- According to MarketStudyReport, global antimicrobial coatings market is anticipated to record a CAGR of 10.2% during 2022-2028 to amass USD 6277 ...
- Global antimicrobial coatings market size to record 10.2% CAGR through 2028on September 19, 2022 at 2:45 am
The analysis on "Global Antimicrobial Coatings Market" concentrates on the growth catalysts and inhibitors for the anticipated period of 2022 to 2028 to give readers a complete overview of the market ...
- Coating for Keyboards and Other Surfaces Shown to Kill COVID-19 and Other Viruses in Minuteson September 18, 2022 at 5:00 pm
A team of University of Michigan engineers and immunologists have developed a new durable coating that works by combining antimicrobial molecules derived from tea tree oil and cinnamon oil with ...
via Bing News
The Latest on: Antimicrobial coating
via Google News