
Devices made of readily available oxide and carbon-based materials can produce clean hydrogen from water over weeks – according to new research.
The findings, co-led by Dr Virgil Andrei, a Research Fellow at St John’s College, University of Cambridge, with academics at Imperial College London, could help overcome one of the key issues in solar fuel production, where current earth-abundant light-absorbing materials are limited through either their performance or stability.
Underexplored materials for light harvesting
Hydrogen fuel will play a critical role in the transition to full decarbonisation and reaching the UK’s goal of net-zero emissions by 2050. With most hydrogen currently supplied from fossil fuels, researchers are now working to find ways to generate hydrogen more sustainably. One way to achieve this is to make devices that can harvest sunlight and split water to produce green hydrogen.
While many light-absorbing materials have been tested for green hydrogen production, most degrade quickly when submerged in water. For example, perovskites are the fastest-growing materials in terms of light-harvesting efficiency, but are unstable in water and contain lead. This presents a risk of leakage; therefore, researchers have been working to develop lead-free alternatives.
Bismuth oxyiodide (BiOI) is a non-toxic semiconductor alternative which has been overlooked for solar fuel applications due to its poor stability in water. But based on previous findings into the potential of BiOI, researchers decided to revisit the promise of this material for the production of green hydrogen.
Dr Robert Hoye, Lecturer in the Department of Materials at Imperial College London, explained: “Bismuth oxyiodide is a fascinating photoactive material that has energy levels at the right positions for water splitting. A few years ago, we demonstrated that BiOI solar cells are more stable than those using state-of-the-art perovskite light absorbers. We wanted to see if we can translate that stability to green hydrogen production.”
Professor Judith Driscoll, Department of Materials Science and Metallurgy, University of Cambridge, said: “We have been working on this material for some time, due to its wide-ranging potential applications, as well as its simplicity of fabrication, low toxicity and good stability. It was great to combine the expertise of the different research groups across Cambridge and with Imperial.”
Breakthrough in solar fuel production
The team of researchers created devices that mimicked the natural photosynthesis process occurring in plant leaves, except they produce fuels like hydrogen instead of sugars. These artificial leaf devices were made from BiOI and other sustainable materials, harvesting sunlight to produce O2, H2 and CO.
Researchers found a way to increase the stability of these artificial leaf devices by inserting BiOI between two oxide layers. The robust oxide-based device structure was further coated with a water-repellent graphite paste, which prevented moisture infiltration. This prolonged the stability of the bismuth oxyiodide light-absorbing pixels from minutes to a couple of months, including the time the devices were left in storage.
This is a significant finding that transforms BiOI into a viable light harvester for stable green hydrogen production.
“These oxide layers improve the ability to produce hydrogen compared to stand-alone BiOI,” said Dr Robert Jagt (Department of Materials Science and Metallurgy, University of Cambridge), one of the co-lead authors.
Researchers further found that artificial leaf devices comprising of multiple light harvesting areas (called ‘pixels’) demonstrated a higher performance over conventional devices with a single larger pixel of same total size. This finding could make the scale up of novel light harvesters much easier and faster for sustainable fuel production.
Dr Virgil Andrei, a co-lead author from the Department of Chemistry in Cambridge, explains: “Even if some pixels are faulty, we were able to disconnect them, so they don’t affect the rest. This meant we could sustain the performance of the small pixels on a larger area.” This increased performance enabled the device to not only produce hydrogen but also reduce CO2 to synthesis gas, an important intermediate in the industrial synthesis of chemicals and pharmaceuticals.
Looking to the future
The findings demonstrate the potential for these new devices to challenge the performance of existing light absorbers. The new ways of making BiOI artificial leaf devices more stable can now be translated to other novel systems, helping to bring them towards commercialisation.
“This is an exciting development! At the moment, few solar fuel systems show stabilities which are compatible to real-world applications. With this work, we make a step forward towards establishing a circular fuel economy”, said Prof Erwin Reisner (Department of Chemistry, Cambridge), one of the corresponding authors.
Original Article: Earth-abundant solar pixels found to produce hydrogen for weeks
More from: University of Cambridge | Imperial College London
The Latest on: Stable green hydrogen production
- Viability of ‘direct’ green hydrogen fuel production evaluated by US researcherson March 26, 2023 at 5:03 pm
Rather than using solar or wind to power electrolysis, researchers are testing the competitiveness of photoelectrochemical cells to produce emissions-free hydrogen fuels.
- Scientists Find New Way To Make Hydrogen Directly From Seawateron March 26, 2023 at 8:00 am
Australian scientists have found a way to produce hydrogen directly from seawater, skipping the need for desalination and its associated cost ...
- 'Green' hydrogen: How photoelectrochemical water splitting may become competitiveon March 24, 2023 at 10:58 pm
The energy payback time of photoelectrochemical 'green' hydrogen production can be reduced dramatically ... photoelectrodes that convert sunlight into electrical energy, are stable in aqueous ...
- New composite material to create green hydrogenon March 22, 2023 at 6:23 am
Green hydrogen is seen as the energy carrier of ... from more abundant resources which also can be used as efficient and stable electrocatalysts," explains UT-researcher Chris Baeumer.
- US researchers evaluate viability of ‘direct’ green hydrogen fuel productionon March 22, 2023 at 1:33 am
Production of green hydrogen typically takes the “indirect ... that convert sunlight into electrical energy, are stable in aqueous solutions, and catalytically split water into hydrogen.
- Researchers evaluate viability of ‘direct’ green hydrogen fuel productionon March 21, 2023 at 5:30 am
Rather than using solar or wind to power electrolysis, researchers are testing the competitiveness of photoelectrochemical cells for producing emissions-free hydrogen fuels.
- Photoelectrochemical Water Splitting May Become Competitive in Green Hydrogen Productionon March 21, 2023 at 3:15 am
The energy payback time of photoelectrochemical "green" hydrogen production can be reduced dramatically ... photoelectrodes that convert sunlight into electrical energy, are stable in aqueous ...
- Green hydrogen: How photoelectrochemical water splitting may become competitiveon March 20, 2023 at 7:20 am
The best PEC cells based on low-cost and stable metal oxide absorbers ... offers a way to significantly reduce the production cost of green hydrogen and increases the economic feasibility of ...
- BP to invest $2 billion to develop green hydrogen hub in Spainon February 27, 2023 at 4:00 pm
"The production of green hydrogen will be another step in strategic ... "To make it happen in the EU, we need a stable and well-balanced regulatory framework, financial support as well as ...
via Bing News
The Latest on: Stable green hydrogen production
[google_news title=”” keyword=”stable green hydrogen production” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
Add Comment