
Nanoparticles (top image) efficiently break down pollutants and are magnetic, making them easily recoverable for reuse (bottom image).
Adapted from ACS Applied Materials & Interfaces 2022, DOI: 10.1021/acsami.1c23466
Membrane filters don’t require much energy to purify water, making them popular for wastewater treatment. To keep these materials in tip-top condition, they’re commonly cleaned with large amounts of strong chemicals, but some of these agents destroy the membranes in the process. Now, researchers reporting in ACS Applied Materials & Interfaces have developed reusable nanoparticle catalysts that incorporate glucose to help efficiently break down contaminants inside these filters without damaging them.
Typically, dirty wastewater filters are unclogged with strong acids, bases or oxidants. Chlorine-containing oxidants such as bleach can break down the most stubborn organic debris. But they also damage polyamide membranes, which are in most commercial nanofiltration systems, and they produce toxic byproducts. A milder alternative to bleach is hydrogen peroxide, but it decomposes contaminants slowly. Previously, scientists have combined hydrogen peroxide with iron oxide to form hydroxyl radicals that improve hydrogen peroxide’s efficiency in a process known as the Fenton reaction. Yet in order for the Fenton reaction to clean filters, extra hydrogen peroxide and acid are needed, increasing financial and environmental costs. One way to avoid these additional chemicals is to use the enzyme glucose oxidase, which simultaneously forms hydrogen peroxide and gluconic acid from glucose and oxygen. So, Jianquan Luo and colleagues wanted to combine glucose oxidase and iron oxide nanoparticles into a system that catalyzes the Fenton-based breakdown of contaminants, creating an efficient and delicate cleaning system for membrane filters.
First, the researchers compared the removal of organic contaminants from polyamide filters by the glucose oxidase enzyme and iron oxide nanoparticles to other cleaning methods, including the traditional Fenton reaction. They found this approach was superior at breaking down the common contaminants bisphenol A and methylene blue, while also preserving more of the membrane structure. Encouraged by their initial results, the team combined glucose oxidase and iron oxide into a single nanoparticle, connecting them with an amino bridge. Finally, they tested the new nanoparticle’s ability to clean methylene blue-soaked nanofiltration membranes, which they fouled and cleaned for three cycles. After each cleaning cycle, the nanoparticles were retrieved with a magnet and reused with fresh glucose to activate the catalyst.
The nanoparticles were highly effective at cleaning the membranes, returning them to 94% of their initial water filtration capacity. Because the nanoparticles don’t require strong chemicals and are easily recoverable, the researchers say their new system is a “greener” and more cost-effective approach for cleaning nanofiltration membranes.
Original Article: A ‘greener’ way to clean wastewater treatment filters
More from: American Chemical Society | Chinese Academy of Sciences
The Latest on: Reusable nanoparticle catalysts
- Found: The 'holy grail of catalysis'—turning methane into methanol under ambient conditions using lighton June 30, 2022 at 9:53 am
The method involves a continuous flow of methane/oxygen-saturated water over a novel metal-organic framework (MOF) catalyst. The MOF is porous and contains different components that each have a ...
- N95 mask with nanoparticle coating developed using 3D printing technologyon June 28, 2022 at 3:08 pm
New Delhi: Researchers have developed a reusable, recyclable ... wherein the outer and first layer of the filter is coated with nanoparticles. The second layer is a high-efficiency particulate ...
- Use, wash, repeat: N95 mask made with 3D printing technology that can be used for five yearson June 28, 2022 at 12:05 pm
The four-layer mask whose outer layer is made up of silicon has a shelf life of more than five years depending upon the use, said the Ministry of Science and Technology in a statement on Monday.
- N95 Mask With Nanoparticle Coating Developed Using 3D Printing Technologyon June 28, 2022 at 1:43 am
New Delhi, June 27 (IANS) Researchers have developed a reusable, recyclable ... the outer and first layer of the filter is coated with nanoparticles. The second layer is a high-efficiency ...
- New N95 mask called 'Nano Breath' mask with nanoparticle coating developed using 3D printing technology [many benefits]on June 27, 2022 at 7:14 am
Researchers have developed a reusable, recyclable, washable, odourless, non-allergic and anti-microbial N95 mask by using 3D printing technology.
- N95 mask with recyclable, reusable qualities developed using 3D Printingon June 27, 2022 at 6:44 am
Researchers have developed a reusable, recyclable ... filtration system with a first-layer filter that is coated with nanoparticles on the outside. High-efficiency particulate absorption (HEPA ...
- Indian researchers develop N95 mask with nanoparticle coating using 3D printing technology: Centreon June 26, 2022 at 11:45 pm
NEW DELHI: Researchers from Amity University (Haryana) have developed a reusable, recyclable ... and first layer of the filter is coated with nanoparticles. The second layer is a high-efficiency ...
- Catalyst from hot wateron June 12, 2022 at 5:00 pm
When exposed to light, which is by and large the most environmentally friendly energy resource, the hybrid material functions like a catalyst, i.e., a photocatalyst. Since the photocatalyst is a ...
via Bing News
The Latest on: Reusable nanoparticle catalysts
via Google News
Add Comment