Researchers at Princeton University and the University of Washington have developed an ultracompact camera the size of a coarse grain of salt. The system relies on a technology called a metasurface, which is studded with 1.6 million cylindrical posts and can be produced much like a computer chip.
Image courtesy of the researchers
Micro-sized cameras have great potential to spot problems in the human body and enable sensing for super-small robots, but past approaches captured fuzzy, distorted images with limited fields of view.
Now, researchers at Princeton University and the University of Washington have overcome these obstacles with an ultracompact camera the size of a coarse grain of salt. The new system can produce crisp, full-color images on par with a conventional compound camera lens 500,000 times larger in volume, the researchers reported in a paper published Nov. 29 in Nature Communications.
Enabled by a joint design of the camera’s hardware and computational processing, the system could enable minimally invasive endoscopy with medical robots to diagnose and treat diseases, and improve imaging for other robots with size and weight constraints. Arrays of thousands of such cameras could be used for full-scene sensing, turning surfaces into cameras.
While a traditional camera uses a series of curved glass or plastic lenses to bend light rays into focus, the new optical system relies on a technology called a metasurface, which can be produced much like a computer chip. Just half a millimeter wide, the metasurface is studded with 1.6 million cylindrical posts, each roughly the size of the human immunodeficiency virus (HIV).
Each post has a unique geometry, and functions like an optical antenna. Varying the design of each post is necessary to correctly shape the entire optical wavefront. With the help of machine learning-based algorithms, the posts’ interactions with light combine to produce the highest-quality images and widest field of view for a full-color metasurface camera developed to date.
A key innovation in the camera’s creation was the integrated design of the optical surface and the signal processing algorithms that produce the image. This boosted the camera’s performance in natural light conditions, in contrast to previous metasurface cameras that required the pure laser light of a laboratory or other ideal conditions to produce high-quality images, said Felix Heide, the study’s senior author and an assistant professor of computer science at Princeton.
The researchers compared images produced with their system to the results of previous metasurface cameras, as well as images captured by a conventional compound optic that uses a series of six refractive lenses. Aside from a bit of blurring at the edges of the frame, the nano-sized camera’s images were comparable to those of the traditional lens setup, which is more than 500,000 times larger in volume.
Other ultracompact metasurface lenses have suffered from major image distortions, small fields of view, and limited ability to capture the full spectrum of visible light — referred to as RGB imaging because it combines red, green and blue to produce different hues.
“It’s been a challenge to design and configure these little nano-structures to do what you want,” said Ethan Tseng, a computer science Ph.D. student at Princeton who co-led the study. “For this specific task of capturing large field of view RGB images, it was previously unclear how to co-design the millions of nano-structures together with post-processing algorithms.”
Co-lead author Shane Colburn tackled this challenge by creating a computational simulator to automate testing of different nano-antenna configurations. Because of the number of antennas and the complexity of their interactions with light, this type of simulation can use “massive amounts of memory and time,” said Colburn. He developed a model to efficiently approximate the metasurfaces’ image production capabilities with sufficient accuracy.
Colburn conducted the work as a Ph.D. student at the University of Washington Department of Electrical & Computer Engineering (UW ECE), where he is now an affiliate assistant professor. He also directs system design at Tunoptix, a Seattle-based company that is commercializing metasurface imaging technologies. Tunoptix was cofounded by Colburn’s graduate adviser Arka Majumdar, an associate professor at the University of Washington in the ECE and physics departments and a coauthor of the study.
Coauthor James Whitehead, a Ph.D. student at UW ECE, fabricated the metasurfaces, which are based on silicon nitride, a glass-like material that is compatible with standard semiconductor manufacturing methods used for computer chips — meaning that a given metasurface design could be easily mass-produced at lower cost than the lenses in conventional cameras.
“Although the approach to optical design is not new, this is the first system that uses a surface optical technology in the front end and neural-based processing in the back,” said Joseph Mait, a consultant at Mait-Optik and a former senior researcher and chief scientist at the U.S. Army Research Laboratory.
“The significance of the published work is completing the Herculean task to jointly design the size, shape and location of the metasurface’s million features and the parameters of the post-detection processing to achieve the desired imaging performance,” added Mait, who was not involved in the study.
Heide and his colleagues are now working to add more computational abilities to the camera itself. Beyond optimizing image quality, they would like to add capabilities for object detection and other sensing modalities relevant for medicine and robotics.
Heide also envisions using ultracompact imagers to create “surfaces as sensors.” “We could turn individual surfaces into cameras that have ultra-high resolution, so you wouldn’t need three cameras on the back of your phone anymore, but the whole back of your phone would become one giant camera. We can think of completely different ways to build devices in the future,” he said.
Original Article: Researchers shrink camera to the size of a salt grain
The Latest on: Metasurface imaging
- Dual-color terahertz spatial light modulator for single-pixel imagingon June 26, 2022 at 5:00 pm
have developed a THz SLM based on metasurface absorber and dual-frequency liquid crystal. Based on the THz SLM, they realized dual-color THz CS imaging. The imaging objects with dispersion ...
- Brainwaves Control Electromagnetic Waves Remotely in Metasurface Prototypeon June 14, 2022 at 1:00 am
Stephen King’s Carrie, Professor X in X-Men and the Scarlet Witch in The Avengers are metaphorical expressions of the innate human desire to move things with the mind. A new study published on ...
- All-dielectric grating structure color filter for sensing and display imagingon June 13, 2022 at 4:59 pm
All-dielectric metasurface structures are proposed to ... which is of great significance to the fields of sensing, display imaging and other fields, according to the researchers.
- Metalenz meta-optics arrive in time-of-flight sensoron June 13, 2022 at 7:16 am
The metasurface component within the VL53L8 direct time-of-flight ... Speaking at the time, Capasso commented that the metalens platform "has the potential to drive a revolution in imaging and sensing ...
- 2nd-generation multi-zone direct Time-of-Flight sensor from STMicroelectronics uses less energy and can range 2X as far as existing productson June 9, 2022 at 6:47 am
Advisor Insights Personal Finance Market Volatility Retirement Planning Start Investing Save for College Best Investments See All ...
- 2nd-generation multi-zone direct Time-of-Flight sensor from STMicroelectronics uses less energy and can range 2X as far as existing productson June 9, 2022 at 6:02 am
Executive Vice President and General Manager of the Imaging Sub-Group within ST’s Analog, MEMS and Sensors Group. “Our latest-generation ranging sensor is a game changer. With its ...
- Metalenz and STMicroelectronics deliver world's first optical metasurface technology for consumer electronics deviceson June 8, 2022 at 5:00 pm
Metalenz and STMicroelectronics deliver world's first optical metasurface technology for consumer electronics devices Boston, MA and Geneva, Switzerland – June 9, 2022 – Metalenz, the first ...
- World’s First Printable Optical Metasurface For Vision, 3D Sensing, LIDAR Now Shipping In Consumer Productson June 7, 2022 at 5:01 pm
“The introduction of products embedding Metalenz’s game-changing metasurface optics now enables ... President and General Manager of ST’s Imaging Sub-Group said in a statement.
- Structural and THz far-field characterizations of the LC integrated metalens (IMAGE)on September 17, 2021 at 7:48 am
Structural and THz far-field characterizations of the LC integrated metalens: (a) SEM micrograph of the partial dielectric metasurface ... bias (75 Vrms). (d) Imaging of a "smiling face" mask ...
via Bing News
The Latest on: Metasurface imaging
via Google News