
An electrode made with a molded Tootsie Roll® and aluminum tubes can help monitor ovulation status and kidney health.
Credit: Adapted from ACS Applied Materials & Interfaces 2021, DOI: 10.1021/acsami.1c11306
Single-use diagnostic tests often aren’t practical for health professionals or patients in resource-limited areas, where cost and waste disposal are big concerns.
So, researchers reporting in ACS Applied Materials & Interfaces have turned to a surprising material, Tootsie Roll® candy, to develop an inexpensive and low-waste device. The candy was used as an electrode, the part of the sensor that detects salt and electrolyte levels in saliva, to monitor ovulation status or kidney health.
Disposable test strips have advanced the speed and accuracy of at-home health monitoring. For example, ovulation predictor kits measure luteinizing hormone levels, and there are test strips that measure creatinine levels for patients with chronic kidney disease. However, their costs add up quickly and, between the packaging and the strips themselves, there’s a lot of waste that needs to be disposed of. Previous researchers have indicated that simple measurements of a person’s salivary salt and electrolyte content could be appropriate for managing some conditions.
So, Beelee Chua and Donghyun Lee wanted to repurpose unconventional and widely available materials, including electrically conductive soft candies, into an easily accessible, low-waste sensor that could simply be licked by patients to analyze their saliva.
To make the prototype sensor, the researchers first flattened a Tootsie Roll® and pressed crevices into its surface in a crosshatched pattern to hold the saliva sample. Then, they inserted two thin, reusable aluminum tubes, which acted as electrical contacts, connecting the candy electrode into a circuit with a current source and an output voltage detector. In preliminary tests, the device could measure salt levels that were physiologically relevant for health monitoring in a salt-water solution and artificial saliva.
For example, when covered in diluted artificial saliva, the sensor could reliably measure a change in voltage low enough to detect the 10-30% drop in salts that occurs when a person ovulates. While the maximum salt content in the artificial saliva samples was similar to that of a healthy adult, the researchers used calculations to estimate that conductivities three times higher, which signal a problem with the kidneys, would be within the measurable range of the device. Although testing with real human samples is still needed, the researchers say that using soft candy as electrodes opens up the possibility for low-waste, inexpensive electrochemical sensors and circuits in the future.
Original Article: Licking a Tootsie Roll® sensor to monitor health
More from: Korea University | American Chemical Society
The Latest on: Candy-based reusable sensor
- 55 Fabulous Last-Minute Father’s Day Gift Ideas He’ll Never Know You Ordered Lateon May 22, 2022 at 5:00 pm
If your old man loves his scotch or bourbon, these reusable gems are a great alternative ... The heart-rate sensor monitors daily and overnight activity and will notify you if it identifies ...
- NX10 Cadon May 14, 2022 at 5:00 pm
As quite often happens, his work is based on an earlier design ... is just two buttons — one to select between the two candy types and another to start the sorting. The hardware is all 3D ...
- Relay-Driven Nixie Clock Gets You To Stop Scrollingon May 13, 2022 at 5:00 pm
This appears to be a relay-based clock with Nixie tubes for digit outputs, and on a scale from “practical” to “eye candy”, it firmly ... the Nixies and the PIR sensor (presumably for ...
- Painless wearable gadget can measure blood sugar, alcohol and muscle fatigue at the SAME timeon May 9, 2022 at 9:01 am
The wearable connects to a reusable electronic ... The Switzerland-based firm began work on monitoring blood pressure using optical sensors 15 years ago, and was ready to bring it to market ...
- Pictures from space! Our image of the dayon May 7, 2022 at 12:39 am
Tereza Pultarova Wednesday, May 11, 2022: A British rocket company Orbex has unveiled a prototype of its reusable micro-rocket ... a new citizen scientist photo based on data from the NASA Juno ...
- Stanford Bioengineers Innovate Multiple Solutions to Tackle COVID-19on May 5, 2022 at 5:00 pm
One of their primary solutions that has gained a lot of traction during the ongoing crisis is the Pneumask, a reusable full-face snorkel mask that prevents transmission of pathogens. The mask kit ...
- 'Supersonic ballet!' Rocket Lab succeeds in catching a falling rocket with a HELICOPTER for the first time – before dropping it into the ocean moments lateron May 2, 2022 at 11:52 pm
The California-based company regularly launches 18-metre (59-foot) rockets from the remote Mahia Peninsula in New Zealand to deliver satellites into space. Making its rockets reusable will ...
via Bing News
The Latest on: Candy-based reusable sensor
via Google News
Add Comment