
Metals settle at the bottom of a vial after being separated from other components in a crushed circuit board through flash Joule heating. The process developed at Rice University could lead to “urban mining” for valuable metals from electronic waste.
(Credit: Jeff Fitlow/Rice University)
Flash Joule heating by Rice lab recovers precious metals from electronic waste in seconds
In what should be a win-win-win for the environment, a process developed at Rice University to extract valuable metals from electronic waste would also use up to 500 times less energy than current lab methods and produce a byproduct clean enough for agricultural land.
The flash Joule heating method introduced last year to produce graphene from carbon sources like waste food and plastic has been adapted to recover rhodium, palladium, gold and silver for reuse.
A report in Nature Communications by the Rice lab of chemist James Tour also shows highly toxic heavy metals including chromium, arsenic, cadmium, mercury and lead are removed from the flashed materials, leaving a byproduct with minimal metal content.
Instantly heating the waste to 3,400 Kelvin (5,660 degrees Fahrenheit) with a jolt of electricity vaporizes the precious metals, and the gases are vented away for separation, storage or disposal. Tour said that with more than 40 million tons of e-waste produced globally every year, there is plenty of potential for “urban mining.”
“Here, the largest growing source of waste becomes a treasure,” Tour said. “This will curtail the need to go all over the world to mine from ores in remote and dangerous places, stripping the Earth’s surface and using gobs of water resources. The treasure is in our dumpsters.”
He noted an increasingly rapid turnover of personal devices like cell phones has driven the worldwide rise of electronic waste, with only about 20% of landfill waste currently being recycled.
“We found a way to get the precious metals back and turn e-waste into a sustainable resource,” he said. “The toxic metals can be removed to spare the environment.”
The lab found flashing e-waste requires some preparation. Guided by lead author and Rice postdoctoral research associate Bing Deng, the researchers powdered circuit boards they used to test the process and added halides, like Teflon or table salt, and a dash of carbon black to improve the recovery yield.
Once flashed, the process relies on “evaporative separation” of the metal vapors. The vapors are transported from the flash chamber under vacuum to another vessel, a cold trap, where they condense into their constituent metals. “The reclaimed metal mixtures in the trap can be further purified to individual metals by well-established refining methods,” Deng said.
The researchers reported that one flash Joule reaction reduced the concentration of lead in the remaining char to below 0.05 parts per million, the level deemed safe for agricultural soils. Levels of arsenic, mercury and chromium were all further reduced by increasing the number of flashes.
“Since each flash takes less than a second, this is easy to do,” Tour said.
The scalable Rice process consumes about 939 kilowatt-hours per ton of material processed, 80 times less energy than commercial smelting furnaces and 500 times less than laboratory tube furnaces, according to the researchers. It also eliminates the lengthy purification required by smelting and leaching processes.
Original Article: Urban mining for metals flashes electronic trash into treasure
More from: Rice University
The Latest on: Flash Joule heating
- Ford teams with Rice University researchers to recycle plastic from old vehicleson May 27, 2022 at 8:14 am
That new or late-model Ford Explorer you might be retailing could be made from some of that old Explorer that exhausted its lifespan.
- Ford could recycle 25 percent of its plastic bulk with a new 'flash heat' methodon May 26, 2022 at 1:00 pm
Ford partnered with Rice University to explore new levels of plastic recycling into viable graphene from end-of-life vehicles. And they were very successful.
- Using flash heating to recycle automotive components into high-value grapheneon May 26, 2022 at 10:24 am
Rice University chemists working with researchers at the Ford Motor Company are turning plastic parts from "end-of-life" vehicles into graphene via the university's flash Joule heating process.
- Flash Joule heating process recycles plastic from end-of-life F-150 trucks into high-value graphene for new vehicleson May 26, 2022 at 9:25 am
Rice University chemists working with researchers at the Ford Motor Company are turning plastic parts from "end-of-life" vehicles into graphene via the university's flash Joule heating process. The ...
- Zapping scrap plastic from cars can turn it into recyclable grapheneon May 26, 2022 at 8:28 am
James Tour at Rice University in Texas and his colleagues have previously found that plastic could be converted into graphene via a process called flash joule heating, where material is heated to ...
- Cars could get a ‘flashy’ upgradeon May 26, 2022 at 8:04 am
Rice University chemists, working with the Ford Motor Company, processes waste plastic from end-of-life trucks into graphene for composite materials in new vehicles.
- Scrap car plastic used to create world’s strongest materialon May 26, 2022 at 8:00 am
Plastic waste from millions of cars scrapped every year could be upcycled to make the world’s strongest known material for reuse on the production line, scientists have found. Researchers in Texas ...
- New Way to Recycle Waste Plastic Into Grapheneon May 15, 2022 at 5:00 pm
Plastic pollution continues to be a massive problem around the world, showing no signs of slowing down. Researchers at Rice University have come up with a new and useful way to repurpose plastic waste ...
- DIY Aluminum Heat Sink Castingon May 13, 2022 at 5:00 pm
[Peter Wirasnik] has been casting his own aluminum heat sinks. He’s working on capturing the heat from a car’s exhaust system and turning it into electricity, kind of like the candle generator.
- Rice Lab Turns Trash Into Graphene in a Flashon May 1, 2022 at 5:01 pm
Flash Joule heating for bulk graphene, developed in the Tour lab by Rice graduate student and lead author Duy Luong, improves upon techniques like exfoliation from graphite and chemical vapor ...
via Bing News
The Latest on: Flash Joule heating
via Google News
Add Comment